Rotary seeder fertilizer spreader

Descripción

• A seeding equipment for grains larger than soybeans (> 5 mm).
• Its polymer body makes it more resistant to falls and impact damages.
• Recommended for flat terrains due to its operation method.
• Equipped with one hopper for seeds and another for fertilizer.
• Included rollers allow for seeding a wide range of grains, including soybeans, corn, beans, watermelon, cotton, peas, beans, chickpeas, peanuts, among others.
• Approximate performance of up to 3 ha/day.
• Constructed with TPX® for lighter handling and improved seeding yields.
• Manufactured with protective additives for sun exposure and chemical components covering the seeds, making it suitable for outdoor work.
• The seeding and fertilizer spreader tips are separated by 5 cm, favoring seed viability and obtaining fertile soil prior to germination.
• Fertilizer graduation per site can be adjusted through a graduator screw on each tip (approximately from 3 to 15g).
• Galvanized steel seeding tines provide high resistance and durability, allowing operation even in hard soils.
• Its opening and seeding mechanism allow operation on untilled soils (note that highly compacted soils may affect seeding depth).
• Effective seeding depth is up to 5cm, ideal for proper germination of most grains.
• The equipment allows for seeding distances calibration from 23 cm to 32 cm using spacers, ensuring highly uniform seeding.
• Calibration for seeds per site ranges from 1 to 2.
• The leveling roller ensures soil flattening after seeding to compact the soil and prevent losses from runoff, sun damage, or bird interference.
• Each hopper has a capacity of up to 4kg (depending on the seed type and fertilizer particle size).
• It is recommended to use certified seeds to ensure uniformity in the seed separation mechanism and achieve even seeding.
• The use of wet or compacted fertilizer is not recommended as it may not be processed in the fertilizer spreader tip graduation mechanisms.
• Avoid use in high humidity conditions (Effective Operating Humidity up to 40%).
• Cleaning the equipment with treated or clean water to remove excess chemicals, dirt, and residues that may deteriorate the materials is advised.