Manual seeder fertilizer spreader

Descripción

• A seeding equipment for grains larger than soybeans (> 5 mm).
• Simultaneously seeds and fertilizes.
• Constructed of plastic to withstand falls and impact damages.
• Its opening and seeding mechanism allow operation on untilled soils (note that highly compacted soils may affect seeding depth).
• The 5 included rollers provide versatility to seed a wide range of grains including soybeans, corn, beans, watermelon, cotton, peas, beans, chickpeas, peanuts, among others.
• Approximate performance of 1.5 ha/day.
• Fertilizer calibration from approximately 3 to 15g (depending on the fertilizer granulometry).
• Mainly recommended for granulated fertilizers and physical blends.
• Separate hoppers for seeds and fertilizers.
• The seeding and fertilizer spreader tips are separated by 5 cm, favoring seed viability and obtaining fertile soil prior to germination.
• Constructed of plastic for lighter handling and improved seeding yields.
• Manufactured with protective additives for sun exposure and chemical components covering the seeds, making it suitable for outdoor work.
• Recommended for undulating terrains, slopes, and flat surfaces due to its operation method.
• Galvanized steel seeding tines provide high resistance and durability, allowing operation even in hard soils.
• It features a guide strip indicating the next seeding site to ensure homogeneous seeding and optimize productive areas.
• Allows for seed calibrations per site (1 to 3) and seeding depth (2, 4, 6, 8, and 10 cm).
• Hopper capacity up to 4kg (depending on the seed type).
• It is recommended to use certified seeds to ensure uniformity in the seed separation mechanism and achieve even seeding.
• Avoid use in high humidity conditions (Effective Operating Humidity up to 40%).
• Cleaning the equipment with treated or clean water to remove excess chemicals, dirt, and residues that may deteriorate the materials is advised.
• Storage conditions: Wash, dry, and apply 3-in-1 oil on springs and moving shafts to prolong the lifespan of metals.
• Usage conditions: Lubricate with 3-in-1 oil on springs and moving shafts to prevent dust accumulation on metallic materials and avoid damage or accelerated wear of the parts.
• Maintenance and spare parts: All spare parts are available, along with calibration, lubrication, and maintenance services.